[Date Prev] | [Thread Prev] | [Thread Next] | [Date Next] -- [Date Index] | [Thread Index] | [List Home]
Subject: [PATCH v6] virtio-net: support device stats
This patch allows the driver to obtain some statistics from the device.
In the back-end implementation, we can count a lot of such information,
which can be used for debugging and judging the running status of the
back-end. We hope to directly display it to the user through ethtool.
Signed-off-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
---
v6:
1. correct the names and descriptions of some stats items
v5:
1. add VIRTIO_NET_CTRL_STATS_GET_CTRL_VQ
2. more item for virtio_net_ctrl_reply_stats_queue_pair
v4:
1. remove dev_stats_num, {rx|tx}_stats_num
2. Use two commands to get the stats of queue pair and dev respectively
v3 changes:
1. add dev_version
2. use queue_pair_index replace rx_num, tx_num
3. Explain the processing when the device and driver support different numbers
of stats
content.tex | 116 +++++++++++++++++++++++++++++++++++++++++++++++++++-
1 file changed, 115 insertions(+), 1 deletion(-)
diff --git a/content.tex b/content.tex
index cf20570..667f006 100644
--- a/content.tex
+++ b/content.tex
@@ -3092,6 +3092,9 @@ \subsection{Feature bits}\label{sec:Device Types / Network Device / Feature bits
\item[VIRTIO_NET_F_CTRL_MAC_ADDR(23)] Set MAC address through control
channel.
+\item[VIRTIO_NET_F_CTRL_STATS(55)] Device can provide device-level statistics
+ to the driver through the control channel.
+
\item[VIRTIO_NET_F_HOST_USO (56)] Device can receive USO packets. Unlike UFO
(fragmenting the packet) the USO splits large UDP packet
to several segments when each of these smaller packets has UDP header.
@@ -3137,6 +3140,7 @@ \subsubsection{Feature bit requirements}\label{sec:Device Types / Network Device
\item[VIRTIO_NET_F_GUEST_ANNOUNCE] Requires VIRTIO_NET_F_CTRL_VQ.
\item[VIRTIO_NET_F_MQ] Requires VIRTIO_NET_F_CTRL_VQ.
\item[VIRTIO_NET_F_CTRL_MAC_ADDR] Requires VIRTIO_NET_F_CTRL_VQ.
+\item[VIRTIO_NET_F_CTRL_STATS] Requires VIRTIO_NET_F_CTRL_VQ.
\item[VIRTIO_NET_F_RSC_EXT] Requires VIRTIO_NET_F_HOST_TSO4 or VIRTIO_NET_F_HOST_TSO6.
\item[VIRTIO_NET_F_RSS] Requires VIRTIO_NET_F_CTRL_VQ.
\end{description}
@@ -4015,6 +4019,7 @@ \subsubsection{Control Virtqueue}\label{sec:Device Types / Network Device / Devi
u8 command;
u8 command-specific-data[];
u8 ack;
+ u8 command-specific-data-reply[];
};
/* ack values */
@@ -4023,7 +4028,8 @@ \subsubsection{Control Virtqueue}\label{sec:Device Types / Network Device / Devi
\end{lstlisting}
The \field{class}, \field{command} and command-specific-data are set by the
-driver, and the device sets the \field{ack} byte. There is little it can
+driver, and the device sets the \field{ack} byte and optionally
+\field{command-specific-data-reply}. There is little it can
do except issue a diagnostic if \field{ack} is not
VIRTIO_NET_OK.
@@ -4504,6 +4510,114 @@ \subsubsection{Legacy Interface: Framing Requirements}\label{sec:Device
See \ref{sec:Basic
Facilities of a Virtio Device / Virtqueues / Message Framing}.
+\paragraph{Device stats}\label{sec:Device Types / Network Device / Device Operation / Control Virtqueue / Device stats}
+
+If the VIRTIO_NET_F_CTRL_STATS feature is negotiated, the driver can
+get device stats from the device by \field{command-specific-data-reply}.
+
+To get the stats, the following definitions are used:
+\begin{lstlisting}
+#define VIRTIO_NET_CTRL_STATS 6
+#define VIRTIO_NET_CTRL_STATS_GET_DEV 0
+#define VIRTIO_NET_CTRL_STATS_GET_CTRL_VQ 1
+#define VIRTIO_NET_CTRL_STATS_GET_QUEUE_PAIR 2
+\end{lstlisting}
+
+The following layout structure are used:
+
+\field{command-specific-data}
+\begin{lstlisting}
+struct virtio_net_ctrl_stats_queue_pair {
+ le64 queue_pair_index;
+}
+\end{lstlisting}
+
+\field{command-specific-data-reply}
+\begin{lstlisting}
+struct virtio_net_ctrl_reply_stats_dev {
+ le64 dev_reset; // The number of device reset.
+}
+
+struct virtio_net_ctrl_reply_stats_cvq {
+ le64 request_num; // The number of requests.
+ le64 ok_num; // The number of ok ack.
+ le64 err_num; // The number of err ack.
+
+ le64 req_rx_promisc; // The number of requests with command VIRTIO_NET_CTRL_RX_PROMISC.
+ le64 req_rx_allmulti; // The number of requests with command VIRTIO_NET_CTRL_RX_ALLMULTI.
+ le64 req_rx_alluni; // The number of requests with command VIRTIO_NET_CTRL_RX_ALLUNI.
+ le64 req_rx_nomulti; // The number of requests with command VIRTIO_NET_CTRL_RX_NOMULTI.
+ le64 req_rx_nouni; // The number of requests with command VIRTIO_NET_CTRL_RX_NOUNI.
+ le64 req_rx_nobcast; // The number of requests with command VIRTIO_NET_CTRL_RX_NOBCAST.
+ le64 req_mac_table_set; // The number of requests with command VIRTIO_NET_CTRL_MAC_TABLE_SET.
+ le64 req_mac_addr_set; // The number of requests with command VIRTIO_NET_CTRL_MAC_ADDR_SET.
+ le64 req_vlan_add; // The number of requests with command VIRTIO_NET_CTRL_VLAN_ADD.
+ le64 req_vlan_del; // The number of requests with command VIRTIO_NET_CTRL_VLAN_DEL.
+ le64 req_announce_ack; // The number of requests with command VIRTIO_NET_CTRL_ANNOUNCE_ACK.
+ le64 req_mq_vq_pairs_set; // The number of requests with command VIRTIO_NET_CTRL_MQ_VQ_PAIRS_SET.
+ le64 req_mq_rss_config; // The number of requests with command VIRTIO_NET_CTRL_MQ_RSS_CONFIG.
+ le64 req_mq_hash_config; // The number of requests with command VIRTIO_NET_CTRL_MQ_HASH_CONFIG.
+ le64 req_guest_offloads_set; // The number of requests with command VIRTIO_NET_CTRL_GUEST_OFFLOADS_SET.
+}
+
+struct virtio_net_ctrl_reply_stats_queue_pair {
+ /* rx stats */
+ le64 rx_packets;
+ le64 rx_bytes;
+
+ le64 rx_notification; // The number of notification from driver.
+ le64 rx_interrupt; // The number of interrupt generated by device.
+
+ le64 rx_drop; // The number of packets dropped by the rx queue. Contains all kinds of packet drop.
+ le64 rx_drop_overruns; // The number of packets dropped by the rx queue when no more avail desc.
+ le64 rx_drop_oversize; // The number of oversized packets received by the rx queue.
+
+ le64 rx_csum_valid; // The number of packets with VIRTIO_NET_HDR_F_DATA_VALID.
+ le64 rx_csum_partial; // The number of packets with VIRTIO_NET_HDR_F_NEEDS_CSUM.
+ le64 rx_csum_bad; // The number of packets with abnormal csum.
+ le64 rx_csum_none; // The number of packets without hardware csum.
+
+ le64 rx_gso_packets; // The number of gso packets received by rx.
+ le64 rx_gso_bytes; // The number of gso bytes received by rx.
+
+ /* tx stats */
+ le64 tx_packets;
+ le64 tx_bytes;
+
+ le64 tx_notification; // The number of notification from driver.
+ le64 tx_interrupt; // The number of interrupt generated by device.
+
+ le64 tx_drop; // The number of packets dropped by the tx queue. Contains all kinds of packet drop.
+ le64 tx_drop_desc_err; // The number of packets dropped when desc is error.
+
+ le64 tx_csum_none; // The number of packets that doesn't require hardware csum.
+ le64 tx_csum_partial; // The number of packets that requires hardware csum.
+
+ le64 tx_gso_packets; // The number of gso packets transmitted.
+ le64 tx_gso_bytes; // The number of gso bytes transmitted.
+}
+\end{lstlisting}
+
+All device stats are divided into three categories:
+\begin{itemize}
+ \item the stats of the device. (command: VIRTIO_NET_CTRL_STATS_GET_DEV)
+ \item the stats of the controlq. (command: VIRTIO_NET_CTRL_STATS_GET_CTRL_VQ)
+ \item the stats of the queue pair. This contains the stats of rx and tx.
+ (command: VIRTIO_NET_CTRL_STATS_GET_QUEUE_PAIR)
+\end{itemize}
+
+When driver sends a VIRTIO_NET_CTRL_STATS_GET_DEV command, \field{command-specific-data} MUST be empty.
+The structure \field{virtio_net_ctrl_reply_stats_dev} MUST be used for \field{command-specific-data-reply}.
+
+When driver sends a VIRTIO_NET_CTRL_STATS_GET_CTRL_VQ command, \field{command-specific-data} MUST be empty.
+The structure \field{virtio_net_ctrl_reply_stats_cvq} MUST be used for \field{command-specific-data-reply}.
+If VIRTIO_NET_F_CTRL_VQ is not negotiated, device MUST set the ack of \field{virtio_net_ctrl} to VIRTIO_NET_ERR;
+
+Driver sends a VIRTIO_NET_CTRL_STATS_GET_QUEUE_PAIR command using \field{virtio_net_ctrl_stats_queue_pair} for \field{command-specific-data}.
+At the same time, the structure \field{virtio_net_ctrl_reply_stats_queue_pair} MUST be used for \field{command-specific-data-reply}.
+\field{queue_pair_index} specify the queue pair index of the queue that the driver wants to get stats.
+If the requested queue_pair_index is out of range, device MUST set the ack of \field{virtio_net_ctrl} to VIRTIO_NET_ERR;
+
\section{Block Device}\label{sec:Device Types / Block Device}
The virtio block device is a simple virtual block device (ie.
--
2.31.0
[Date Prev] | [Thread Prev] | [Thread Next] | [Date Next] -- [Date Index] | [Thread Index] | [List Home]