xspa-interop-tech — archive

Re: [xspa-interop-tech] IBM's WS-Trust endpoint is up

From: Jiandong Guo
To: [email protected]
Date: Wed, 24 Feb 2010 01:59:00 -0000



  


Craig Forster wrote:
OF3EF9C371.9EFCB8A5-ON4A2576D4.00033275-4A2576D4.000340DA@au1.ibm.com" type="cite">
  Hi Jiandong,

The endpoint should handle both SOAP 1.1 and SOAP 1.2.  I'll double check
to confirm that.
  

The wsdl specifies soap 1.1. When I send SOAP 1.2 message, I got fault
back.

OF3EF9C371.9EFCB8A5-ON4A2576D4.00033275-4A2576D4.000340DA@au1.ibm.com" type="cite">
  It also appears that using HTTP, rather than HTTPS, should be fine as well.
  

Yes, Http works fine. I will use it.


Thanks!


Jiandong

OF3EF9C371.9EFCB8A5-ON4A2576D4.00033275-4A2576D4.000340DA@au1.ibm.com" type="cite">
  Regards,
Craig

---
craig forster | staff software engineer | ibm australia development labs
http://blogs.tap.ibm.com/weblogs/craigforster/


                                                                                                                             
  From:       Jiandong Guo <[email protected]>                                                                            
                                                                                                                             
  To:         Duane DeCouteau <[email protected]>                                                                     
                                                                                                                             
  Cc:         Craig Forster/Australia/IBM@IBMAU, [email protected]                                      
                                                                                                                             
  Date:       24/02/2010 03:03 AM                                                                                            
                                                                                                                             
  Subject:    Re: [xspa-interop-tech] IBM's WS-Trust endpoint is up                                                          
                                                                                                                             





Hi Craig,

You have https here. If you want SSL, you need to give us the SSL
certificate if it is not issued from a well known CA.
What soap version you set up? In your captured mesages, I see soap 1.2. But
here is seems you have soap 1.1.

We have been using soap 1.2. Can we all use that?

Thanks!

Jiandong