xspa-interop-tech — archive

Re: [xspa-interop-tech] IBM's WS-Trust endpoint is up

From: Jiandong Guo
To: [email protected]
Date: Wed, 24 Feb 2010 02:25:00 -0000



  
  


Craig Forster wrote:
OF16950B3A.D52E46CB-ON4A2576D4.000AF126-4A2576D4.000AF9C2@au1.ibm.com" type="cite">
  
    
      When I send SOAP 1.2 message, I got fault back.
      
    
  
  
I'll look into it.

Is it a big problem if we can't use SOAP 1.2?
  

It is not a big problem. Just that we need to do some change on our
side to use SOAP 1.1.


Thanks!


Jiandong


OF16950B3A.D52E46CB-ON4A2576D4.000AF126-4A2576D4.000AF9C2@au1.ibm.com" type="cite">
  ---
craig forster | staff software engineer | ibm australia development labs
http://blogs.tap.ibm.com/weblogs/craigforster/


                                                                                                                             
  From:       Jiandong Guo <[email protected]>                                                                            
                                                                                                                             
  To:         Craig Forster/Australia/IBM@IBMAU                                                                              
                                                                                                                             
  Cc:         Duane DeCouteau <[email protected]>, [email protected]                             
                                                                                                                             
  Date:       24/02/2010 11:58 AM                                                                                            
                                                                                                                             
  Subject:    Re: [xspa-interop-tech] IBM's WS-Trust endpoint is up                                                          
                                                                                                                             
  Sent by:    [email protected]                                                                                           
                                                                                                                             





Craig Forster wrote:
      Hi Jiandong,

      The endpoint should handle both SOAP 1.1 and SOAP 1.2.  I'll double
      check
      to confirm that.

The wsdl specifies soap 1.1. When I send SOAP 1.2 message, I got fault
back.

      It also appears that using HTTP, rather than HTTPS, should be fine as
      well.

Yes, Http works fine. I will use it.

Thanks!

Jiandong

      Regards,
      Craig

      ---
      craig forster | staff software engineer | ibm australia development
      labs
      http://blogs.tap.ibm.com/weblogs/craigforster/



        From:       Jiandong Guo <[email protected]>


        To:         Duane DeCouteau <[email protected]>


        Cc:         Craig Forster/Australia/IBM@IBMAU,
      [email protected]


        Date:       24/02/2010 03:03 AM


        Subject:    Re: [xspa-interop-tech] IBM's WS-Trust endpoint is up







      Hi Craig,

      You have https here. If you want SSL, you need to give us the SSL
      certificate if it is not issued from a well known CA.
      What soap version you set up? In your captured mesages, I see soap
      1.2. But
      here is seems you have soap 1.1.

      We have been using soap 1.2. Can we all use that?

      Thanks!

      Jiandong